The equipment is applicable for concentration technology of chinese medicines,western medicines ,grape sugar , starch ,monosodium glutamate,dairy foods and liquids of chemical industry,especially ideal for low-temperature vacuum concentration of heat sensitive substances. After carefully calculating and designing ,compared with before,the equipment has more characteristics and benefits.You can choose the concentrators with technical parameters indicated according to the quantity of materials for concentration.
Characteristics and benefits
1.Energy-saving, taking SJN-1000B type for calcuating for a year , approximately 5000 tons of steam, and cooling water of hundreds of thousands of tons can be saved thus, cost of nearly 200.000RMB is reduced.
2.The concentrator adopts external heating natural cycling mode and negative pressure evaporating mode, with instant evaporation and great concentrated specific gravity up to 1.4(common soaked chinese medicine creams).Open boiler is not needed to reclaim creams.
3.The concentrator adopts both tri-effect evaporating mode and second-time steam utilization . Therefore, the investment on boilers can be reduced and energy can be saved by 70%,when compared with single-effect concentrator . Within a year, the investment saved can be up to total investment on the concentrator.
4.Multiply functions:1)The concentration of alcohol can be reclaimed is approximatedly 80%,with automatic material inlet and outlet.2)Creams can form in one time material is fed in first procedure,through second procedure, and forms in the third procedure.
5.The concentrator has a special structure.The materials after concentrating are thick and even. The materials can be concentrated in seal status without any bubbles, so material loss and pollution are reduced greatly. The materials concentrated will not aggiomerate,so it is easy to cllean.You can open the top cover or bottom cover to clean.Therefore,one person is enough for cleaning.
6.All areas of the concentrator contacting with materials are made of (SUS304 or 316) stainless steel according to requirements in laws related to medicines and foods,and requirements of GMP.It has nice appearance.Heater and evaporator have external heat preservation layers.Ther heat preservation layers are made of stainless steel and polished with semi-luster for nice apperance in layout of workshop.
|Max evaporation kg/h||600||1200||1700||2300||5500||8800||23000|
|Steam pres. Mpa||0.09-0.3||
|Steam consumption kg/h||200||350||500||650||1500||2000||7000|
|First-effect heater m2||2.1||3.6||5.2||6.8||15||21||73|
|Third effect evaporation kg/h||~200||~400||~566||~766||~1833||~2933||~7666|
|Third effect condenser area m2||3.1||5.5||7.9||10.3||23||
|Cooling water consumption t/h||5||10||13||15||18||25||40|
|Equipment weight Kg||1.6||2.1||2.85||3.65||5.1||6.85||8.0|
|Dimention L mm||5000||6500||7000||7500||8000||9000||15000|
+ TEL: +0086-577-86902566
+ FAX: +0086-577-86834888
+ Mob: +0086-15868559136
+ Mail: firstname.lastname@example.org
+ Skpye: davidliu1113
+ ADD: Add:No.529,Avenue 2 , Road 15, Binhai Economic Development Zone, Wenzhou City, China
Enquiry：Three effect concentrator